How far back to go: 24 vs 36 months of statements in diligence

24 or 36 months of statements in diligence? Buyers face a real trade-off between depth and cost. Here’s when each makes sense.

Buyer reviewing 24 and 36 months of bank and revenue statements during small business diligence

P
Paola Vargas
Content Lead, Outsourcing Processing — M&A financial due diligence & earnings analysis

Free Trial, No Card

Paying $15-25K and waiting weeks for a Quality of Earnings report?

Normalized EBITDA and SDE calculated and organized for your acquisition review — human-reviewed, ready before you make an offer. See a real report in minutes.

Built for EBITDA normalization & SDE calculation
Every adjustment flagged for your review — never auto-applied
Faster & lower-cost than a traditional QoE engagement
Free trial, no credit card required

Every buyer reaches a moment in diligence when the spreadsheet question lands: how far back do we actually pull statements? The choice between 24 and 36 months of bank, credit card, and revenue data feels like a small logistics call, but it shapes your normalization confidence, your timeline, and your cost. Pull too little and you miss seasonal patterns or one-time expenses that skew EBITDA. Pull too much and you’re swimming in data that muddies rather than clarifies—especially if the seller’s records degrade or accounting shifts partway through. This is not a “more is better” decision; it’s a tradeoff between verification depth and diligence speed that changes based on the business, the deal size, and what the initial financials already tell you.

Does this sound familiar? A seller’s EBITDA looks great until you start questioning the add-backs. See how the platform organizes normalized earnings for your own review — free trial, no credit card required.

The Case for 24 Months: Speed and Cost

Two years of statements is the floor for most acquisitions under $2 million in revenue. It captures two full seasonal cycles, enough to spot recurring patterns in cash flow and identify true one-time events. If a service business always sees a Q4 surge in billings, 24 months makes that obvious. If a retailer takes a hit every August for inventory write-downs, you catch it.

The practical advantage is velocity. Twenty-four months means roughly 50 bank statements (if monthly), 24 P&L statements (monthly or quarterly), and revenue detail you can work through in 3–4 weeks of focused review. Your CPA’s time cost is lower. Outsourcing Processing or your internal team can organize the data, calculate normalized EBITDA, and flag anomalies faster. For a sub-$5M deal, that difference in timeline and professional fees can be real—sometimes $3,000 to $8,000 in accounting time alone, depending on data quality and complexity.

Twenty-four months also works well when:

  • The business is stable year-over-year with no major shifts in product mix, pricing, or customers
  • The seller has clean, consistent bookkeeping across the full period
  • Your initial 3–6 months of statements showed no surprises
  • Working capital requirements are straightforward (no large inventory fluctuations or aging payables)
  • The deal size is under $5 million and due diligence budget is constrained

The Case for 36 Months: Depth and Pattern Confidence

Three years of statements is standard for larger acquisitions, strategic add-ons, or any deal where normalized earnings are material to the valuation. The third year gives you one extra full cycle—critical if the business is seasonal, if customer concentration has shifted, or if the seller has made operational changes (hiring, pricing, product launch) in the last 18 months.

Imagine a staffing business that placed 40% of its gross profit with three large clients in 2024, but in early 2025 lost one of them and replaced it with four mid-sized accounts. Looking at 24 months gets you the loss; 36 months shows you that this client concentration was normal, or that the diversification is actually an improvement over the prior year. That context shapes whether you adjust EBITDA, change your multiple, or build contingencies into the deal structure.

Thirty-six months also protects you against accounting changes. If the seller switched payroll processors, moved from cash to accrual, or changed cost capitalization in year two, a third year reveals whether the practice was intentional or temporary. It’s the difference between normalizing a one-time systems cost and missing a structural shift in how the business records expenses.

Pull 36 months when:

  • Customer or revenue concentration is above 20–25% in any single account
  • The business is highly seasonal (construction, landscaping, tax prep, retail)
  • Working capital is volatile or tied to inventory cycles
  • The seller has made operational or financial reporting changes in the last 24 months
  • Deal value exceeds $5 million or normalized EBITDA is a major valuation input

How to Decide: A Practical Checklist

Start with three filters:

Deal size and complexity. Sub-$2M revenue, stable, clean books? 24 months often suffices. $5M+, complex structures, or strategic fit? 36 months is safer. In the $2–5M band, it depends on the other factors below.

Initial data quality and anomalies. Request the first 6 months of seller-provided statements during LOI stage. If they’re clean and show normal patterns, 24 months is reasonable. If months 1–3 show expense spikes, missing invoices, or accounting restatements, 36 months is prudent—you need to see whether those issues recur or resolve.

Business model and seasonality. If COGS or payroll is stable month-to-month and the customer base isn’t heavily seasonal, 24 months captures enough. If the business swings 30%+ quarter-to-quarter, or relies on seasonal hiring, contracts, or project cycles, three full years give you real confidence in your normalized run-rate.

A worked example: Imagine a small digital marketing agency with $1.8M in revenue. It has five clients accounting for 70% of revenue. Initial LOI-stage data (months 1–3) looks clean: payroll is consistent, no unexplained charges. But client mix is concentrated, and you don’t know if this concentration is stable or trending. Pull 36 months. If the top-five breakdown stays roughly the same across all three years, you can normalize EBITDA with confidence. If client concentration was 50% two years ago and has drifted upward, you know it’s a risk to model forward—and you price or structure accordingly.

What Happens After You Choose: The Follow-Up Work

Once you’ve selected your statement period, the real diligence is standardizing them. Months 1–12 and months 25–36 may be in different formats, different detail, or from different accounting systems. Your job is to ensure consistent categorization of add-backs (owner salary, discretionary spending, one-time charges) across the entire period, not just the most recent months. That consistency is what turns raw statements into normalized earnings.

If you’re using Outsourcing Processing or similar normalized earnings tools for smaller deals, you’ll upload the full statement set and flag anomalies for human review. The platform organizes the data and calculates EBITDA, but it’s not doing the detective work—you are, backed by organized data. That’s why statement completeness matters: garbage in, garbage out applies fully.

Build a checklist:

  • Ensure all bank statements (checking, savings, credit cards, loan accounts) are included, with no gaps
  • Reconcile monthly or quarterly P&L to bank deposits and major expense categories
  • Document every add-back (owner salary, benefits, discretionary spending, one-time costs) with a source and justification
  • Flag any months where accounting practices or reporting changed
  • Confirm revenue recognition method (cash vs. accrual) is consistent across the period

The Gray Zone: When 30 Months Makes Sense

Not every answer is 24 or 36. Some buyers request 30 months as a compromise: two years plus two quarters, capturing a full year-over-year cycle and part of a third seasonal swing without the cost and timeline hit of a full third year. This works when the business has clear seasonality but shorter planning cycles, or when your deal timeline is tight. It’s less common in formal LOIs, but common in smaller deals where diligence is done lean.

Frequently Asked Questions

Do I need 36 months if the seller provided audited or reviewed financial statements?

Audited statements provide assurance on account balances but don’t replace the diligence work of reviewing underlying statements yourself. Audited financials are often annual, not monthly, and don’t give you the month-to-month cash flow or add-back visibility you need to normalize EBITDA. Pull the full 24 or 36 months of bank and P&L statements regardless; audited financials inform your review, they don’t replace it.

What if the seller says they only have 18 months of clean statements?

Accept what you can get, but adjust your normalization confidence accordingly. With 18 months, you’re seeing 1.5 seasonal cycles, enough to spot patterns but not to confirm they’re stable. Use 18 months to normalize EBITDA, but make add-backs conservative and flag working capital assumptions as higher-risk. You may also request 12 months of older statements to fill the gap, even if they’re in a different format or less tidy. Rarely is data truly unavailable—it’s usually just not organized.

Should I pull statements from before a change in ownership or management?

If ownership or key management changed within your statement period, yes—but treat pre-change data separately. A business that changed ownership two years ago: pull 36 months, but normalize only months 13–36 as your forward run-rate. Months 1–12 are historical under a different operator. This prevents you from averaging in old performance and makes your normalized EBITDA truer to the business the buyer is acquiring.

Can I skip months if they look messy or the seller says they’re unreliable?

No. Skipped months are red flags, and unexplained gaps in data undermine your normalization. If specific months are messy, investigate why (system migration, accounting restatement, major one-time event) and include them anyway, with notation. Your job is to understand what actually happened, not to exclude data because it’s inconvenient.

How do I decide between 24 and 36 months on a tight deal timeline?

Prioritize data quality over span. If you can pull clean 24 months in two weeks, that’s often better than rushing through 36 messy months in the same timeline. Start with 24, and if the initial review raises questions (seasonality not clear, anomalies unexplained, concentration unclear), request additional months. Most deals that start at 24 months end up at 30–36 as diligence deepens, but you don’t have to commit upfront.

Key Takeaways

Twenty-four months works for stable, smaller businesses with clean bookkeeping and straightforward business models. Thirty-six months is the safer default for anything with seasonality, customer concentration, recent operational changes, or deal values above $5 million. The choice is not about best practices—it’s about risk and the specific data story the business tells you. Start with your checklist, review the first 6 months of seller-provided statements early, and decide based on what you see, not on a universal rule. Consistent categorization and add-back justification across your full statement period matters more than the exact number of months.

This article is educational and does not constitute M&A, investment, or accounting advice — confirm findings with a licensed CPA or M&A advisor before making an offer.

This article is educational and does not constitute M&A, investment, or accounting advice — confirm findings with a licensed CPA or M&A advisor before making an offer.

See Normalized Earnings, Organized

EBITDA and SDE adjustments calculated and organized for your acquisition review — human-reviewed, never auto-applied, free trial, no credit card.